Rehau drip hose 16mm, 50m, including connection set

Drip Hose The REHAU drip hose ensures an even water distribution to the soil and plants and is suitable for both above-ground and underground installation. It features built-in, pressure-compensated drippers that combine labyrinth and silicone membrane technology. 

By targeted and drip-wise delivery, up to 70% water can be saved when laid in the ground, about 50% for above-ground installation.

Characteristics

• Length: 50m
• The drippers are installed at a distance of 30 cm.
• At an operating pressure between 0.8 and 2.5 bar, the water output per dripper is 1.6 liters per hour.
• maximum laying length: 150 m
• easy to shorten or lengthen

Included in the scope of delivery

• 50 m roll drip hose
• Outer diameter 16 mm
• 1x tap connection
• 1x T-connector 16 mm
• 1x Endstopfen 16 mm
• 1x hose nozzle 16 mm x 21 mm (1/2") male thread (for connection with the tap fitting).

An ideal complement is the Rehau drip hose/pearl hose accessory set with T-pieces, 90° angles, extensions, and end pieces. To prevent clogging of the nozzles, we recommend using a water filter, especially with older pipes or, for example, well systems.

Ideally used with the smart MIYO irrigation. In sensor-controlled irrigation, the irrigation limits are usually set narrowly. If no Sensor is used, the water pressure should be set very low and long irrigation times should be used.

Here is the MIYO Starter Set.

Manufacturer: Rehau
Manufacturer part number: 12025941