Wonach suchen Sie?

Miyo is an intelligent, radio -based irrigation system for gardens of all size, consisting of Cube, Sensors and Valve. A Cube can control many irrigation circles. The irrigation circle will be a Sensor and one or several Valves.

The Cube is the brain of your Miyo system. It keeps the connection with sensors and valves and coordinates irrigation. It takes into account your individual requirements, weather forecasts and optional messages from the smart home.

The sensor measures and transmits moisture values, temperature and brightness to the cube. 

Valves are opened automatically or manually depending on the garden settings from the Cube or via the cell phone app.

The sensor and valve are powered from solar energy and therefore do not require any batteries. The MIYO system optimizes the irrigation of your plants, saving water and ensures healthy soil and plants.

Miyo does without batteries. Sensors and valves are charged solar. This is good for the environment, saves the annoying battery change and protects against functional failure by empty batteries.

With MIYO there is no supervision and no irrigation during or before rainfall. This significantly lowers water consumption and is a blessing for soil and plants.

Thanks to a special radio standard, the sensors, valves and the Cube communicate up to a range of 300 meters in the free field and you can set up Miyo in gardens of all size. So you do not need an internet connection or cabling to the last corner of your garden!

The app (iOS and Android) offers extensive functions for garden control and is also easy and intuitive to use. Without long operating instructions, Miyo is installed and furnished in a few minutes.

You can also only limit Miyo to your home WLAN. The Cube then receives weather data and updates from the cloud, but no personal data from the Cube is added to the cloud.

In addition, all data is stored locally on the Cube. This means that there is no internet connection apart from the installation and your garden is also well cared for in the event of an internet failure. Only if a global access using the app is required, the Cube must be connected to the cloud.

The simplest irrigation takes place manually About the app. A period between 1 and 60 min can be set. All valves of the irrigation area can be irrigated at the same time or one after the other (staggered).

The second irrigation mode is time -controlled as with an irrigation computer. Any number of irrigation windows can be created for every weekday. Weather and weather forecast can be taken into account and staggered.

In Miyo mode, irrigation takes place within defined time windows when the soil moisture measured by the sensor is below the specified border. Rain forecasts for the next 12 hours are taken into account. This means that irrigation only takes place if it is necessary and the water consumption is reduced by up to 50%.

All MIYO components have a high-quality radio module, which is more expensive both in development and in production than the electronics in stand-alone irrigation computers.

For the Miyo Cloud, costs for constant program development as well as for servers and software licenses are incurred. For this you get incomparable comfort and range of functions in the control of your irrigation. 

The integrated battery technology also increases the product costs, but saves you battery costs for many years in the operation.

Miyo develops and produces almost exclusively in Europe, mostly in Austria. High -quality components and materials are processed, and we also strive for sustainability in all areas. The products are sustainable in use because they save batteries and water. In the packaging, we only use the sustainable raw materials of paper or cardboard.

This explains the price differences between smart products and conventional irrigation computers. Compared to other "smart" systems, the MIYO products are relied in relation to product quality and range of functions in the middle price segment.

The cost of the hardware is one -time costs. You can download the app for free. If the Cube runs at home within its own WiFi, there are no costs. If you have connected Miyo to the Internet, costs can result in your mobile phone/internet provider.

Miyo is ideal for irrigation of balconies and terraces and from small to medium -sized gardens to approx. 1,000 m². Since the sensor and valve are operated with solar energy, they must be placed outdoors. The solar charge is not sufficient indoors and the devices cannot be used.

With a Cube you can divide your garden into several irrigation areas. At least one valve is required for each irrigation area and a sensor can be used per irrigation area. In total, more than 200 devices can be connected to a cube.

The MIYO app (iOS and Android) is necessary to commission the MIYO irrigation system. 

Any number of irrigation circles can be created and assigned to these devices. Extensive settings are possible for each irrigation circle, such as the irrigation times and limits for the soil moisture. 

In current operation, the app provides information about temperature, soil moisture and planned irrigation of all irrigation areas. The weather and weather/rain forecast are also displayed and if irrigation are postponed due to rain forecast. All settings can be changed at any time and irrigation at any time can be started manually.

The development of the most important parameters is shown graphically for the last week. 

After the first setting, Miyo also works without an app.

The solar panel does not need a direct sun, but is very efficient even with emitted and reflected sunlight. Brightness is therefore more important for the orientation than direct orientation towards the sun. If in doubt, north and bright is better than south and shaded.

The power consumption of the MIYO devices is minimally due to the wax rhythm (1 second of 20 in the valves, 1 second of 30 in the sensors) and the hardware design. There are therefore small loading times to preserve the battery charge. 1 hour of intensive brightness per day are enough to maintain loading. In poor lighting conditions, we recommend that the devices are installed directly on the sun in spring before commissioning.

A sufficient charge is usually not possible indoors.

The battery has a capacity of 800 mAh. This corresponds to about 40 hours of load over the solar panel in good weather (10 hours on double valve). A fully charged battery can maintain the operation for about 30 days without loading.

All components of a MIYO system communicate with each other on 15 frequencies in the free frequency bands 862-870 MHz for Europe and most countries in Africa and Asia or 902-928 MHz for the USA, Canada and the countries of Central and South America. 

The radio operation on these frequencies is permitted without permission. The technical advantage of these frequencies is the much better material penetration (e.g. walls, windows, plants) of the radio signal compared to the higher -frequency signals in WLAN and Bluetooth (approx. 2500 MHz).

About 200 m can be bridged in the free field without obstacles. The range is reduced by: metal: very strong concrete walls: strong brick walls: midwood, window: low

The radio spread takes place straight between the antennas of cube and devices. This means that for radio quality, the obstacles between the antennas are crucial.

Realistic can be achieved with a range of 50-70m in the garden with penetrating 2-3 brick walls.

1. To ensure a sufficient solar load of the devices, the devices should load on the sun for at least 2 hours. If the devices are very badly unloaded, we recommend having the devices load in the sun for a day. Unwinned devices should not be put into operation in the evening, since the battery may not load enough energy for the night.
2. Pick cube (USB and Ethernet): As soon as the Cube is supplied with electricity, an LED shines, after about 1 minute all 3 LEDs shine. The medium LED signals that the Cube application runs normally and the radio network has started. The 3. LED signals a successful connection to the Miyo Cloud via the Internet. If the third LED does not light up, please check the Internet connection.
3. Download MIYO app on the mobile phone and register.
4. Press white "pairing" button on the cube and continue the setup of the garden on the mobile phone. QR code on the underside of the cube scan and follow the instructions.
5. Connect devices: Stay the magnets at the top right of the side on the housing 3 sec until the green LED flashes on the device. Start search in the app.

You can find more detailed information at Downloads And Miyo Support will be happy to help with any questions.

Install the cube where you have an internet and a power connection, i.e. usually near your internet router. The Cube needs an Ethernet cable connection. In order to achieve a long range of the radio system, a place near your garden makes sense. In any case, the radio signal should not be hindered by metal surfaces or thick concrete walls.

Place the cube in the building in any case.

Cube and device are connected in the entry mode. 

Hold the magnets to the right side area at the upper edge of the solar panel of the valve/sensor for 3 seconds, as in the Rapid shown. (With a double valve to the Miyo logo on the front.)

The LED begins to flash green. This means that the sensor or the valve is ready for connecting. The further connection takes place in the app.

If the LED does not start to flash, the battery of the device is probably empty. Put the device in the sun for 4 hours to charge the battery. Charging does not work through a window pane.

With a magnetic contact of more than 10 seconds on the device, the connection/configuration is deleted again.

Each device has a unique address and is therefore clearly identifiable.

If you click on the lamp symbol during installation in the app in the app in the "Create irrigation area" section (or in the settings of each installed irrigation area), the LED lights up on the corresponding sensor or valve. Patience - This can be delayed for up to 30 seconds.

You can also store a name and image with every irrigation area that shows the area with sensor and valve.

The first LED (from left) shows the power supply. 

The second LED provides information on whether the MIYO application is running on the Cube and the radio network is sensors and valves. 

The third lamp informs whether the Cube is connected to the Miyo cloud via the Internet. If you deactivate the cloud connection in the garden settings of your app, this third lamp expires.

The button has several functions. 

• When pressed briefly, he activates the tuning to connect the cube to the app
• If it is pressed for 5 seconds, the Cube restarts
• If it is pressed for 20 seconds, the Cube settings are reset

Select a location to be watered as bright as possible. The location must not be in a depression and is intended to reflect the conditions (soil moisture, temperature and brightness) of the area to be watered. Make sure that the sensor's solar surface is not covered with leaves and gets enough light.

The electronic component for measuring the soil moisture is located on the lower neck of the sensor and is sensitive. The sensory surface must not be scratched and should not lie on stones, wood, roots or the like for optimal measurement, but if possible on homogeneous soil. Caves around the sensor surface affect the measurement accuracy.

The sensor is therefore best planted like a plant. Grab with a small shovel an approximately 15 cm deep hole in which the sensor is placed. Then fill the hole with loose earth or with potting soil. After that, please check the earth carefully again so that the sensor area has contact with the earth. Gießen also helps to compress the earth.

The MIYO standard connections are compatible with all standard irrigation products.

You also get some important hoses, rain and fittings in our Web shop. These are branded products of renowned partners that are perfectly matched to Miyo.

Each account can be assigned to any number of cubes in the app (garden management), e.g. a cube for the balcony, another cube for the garden or for the holiday home. 

Iftt offers the possibility to combine Miyo with a variety of other smart home apps, voice controls and other apps. To do this, invite the IFTTT app from the Apple App Store or the Google Play Store.

The first step for all systems is the connection with ifttt: If you downloaded the Ifttt app, search for the Miyo service (input in the search field: Miyo) and connect to it. To connect you will be forwarded to the my.miyo.garden portal, in which you have to register with your Miyo access data once.

Voice control with Amazon Alexa: Connect the Amazon Alexa Service in the IFTTT app. Then create a new applet in the IFTTT app and choose Amazon Alexa as "if this" service. With the trigger "Say a Specific Phrase", any phrase can be selected for starting. As "that that" service, choose Miyo and select the action, which is to be carried out by voice control (e.g. start/stop irrigation, inform the cube about rain, etc.). The standard applet title provides a preview of voice control. With the language entry “Alexa Trigger " the IFTTT applet is now executed.

Voice control with Google Assistant V2: Connect the Google Assistant V2 Service in the IFTTT app. Then create a new applet in the IFTTT app and select Google Assistant V2 as "if this" service. With the trigger "Activate Scene", any phrase can be selected for starting. As "that that" service, choose Miyo and select the action, which is to be carried out by voice control (e.g. start/stop irrigation, inform the cube about rain, etc.). With the language input “OK Google, Activate " the IFTTT applet is now executed.

Voice control with iOS Short commands: Connect the iOS Shortcut's service in the ITTT app. Then create a new applet in the IFTTT app and select as "if this" service iOS Shortcuts. With the trigger "Shortcut Automation Started", a placeholder is configured to the iOS short commands (the actual short command must be configured in the shortcuts app after completing the Ifttt Applet). As "that that" service, choose Miyo and select the action, which is to be carried out by the short command (e.g. start/stop irrigation, inform the cube about rain, etc.). After saving the IFTTT applet, go to the short command app. Create a new short command and add the IFTTT "Trigger Applet" campaign. Select the IFTTT-APPLET at “Select an Applet”. With the help of the language input Siri, the short command can be started through its name.

Details for use also hereGermanor here onEnglish.

We will send you an email when registering. This includes a link to confirm your email address. The first 48 hours after registration you can easily use the MIYO app without confirmation. 

After these 48 hours, the account will be blocked if the email address has not been confirmed. If we are supposed to send you the mail with the confirmation link again, please send an email to support@miyo.garden.

If the irrigation is started manually via the app, Miyo irrigates for the period (1-60 min) selectable in the dashboard of the app. The irrigation can be broken off manually at any time. With several valves in the irrigation area, each valve irrigates for this duration. If the valve of the irrigation area staggered (setting "graduation" in sensors and valves), irrigation is in progress. 

Example manual irrigation for 15 minutes in a circle with 3 valves: 

Season from: all 3 valves water at the same time for 15 min

Graduate one: the valves irrigate one after the other for 15 minutes each. Total duration 45 min + 1-2 min for switching

If the automatic irrigation is switched on, you have to differentiate whether a sensor is active or not.

Automatic irrigation with sensor:

Duration duration depends on the soil type: loamy 25 min, sandy 10 min, mixed 20 min, unknown 15 min

Irrigation with drip hose or pearl tube: the above times x2

Depending on the setting of the staggering, the irrigation of all valves of the irrigation area takes place at the same time or in succession.

Measurement time after irrigation: loamy 15 min, sandy 5 min, mixed 10 min, unknown 10 min

After that, the current soil moisture is measured and if the set upper limit of the soil moisture is not reached, another irrigation cycle takes place.

Automatic irrigation without sensor:

The irrigation is used for the time areas stored in the irrigation settings.

Graduation from: All valves water at the same time throughout the time range

Graduation: the valves in successive the set duration of the time range.

Example: 4 valves staggered, time range 5:00 a.m. to 6:00 a.m. The irrigation lasts from 5:00 a.m. to 9:00 a.m.! Ie the time range only applies to the primary valve. The other valves irritate outside the time area.

Based on the garden position, Miyo determines which frequency band (863-870 MHz or 902-928MHz) is legally permitted. In the MIYO app in the garden settings, one of the permissible frequencies can be chosen. In Europe, radio quality is usually best at a frequency of 868 MHz. If there is already a radio network on a frequency locally, it makes sense to switch to a different frequency in order to avoid interruptions.

The displayed temperature often looks very high, but this can be easily explained:

Usually, thermometers measure the air temperature in the shade, at least 1.5 meters above the floor and are wind-protected. However, our sensor is on the ground and is exposed to direct solar radiation and weather. The soil also stores and reflects a lot of warmth and the sun also heats the housing. The measured values ​​are therefore not wrong and provide MIYO important information about the optimal irrigation of your plants.

Watering at intervals gives the water time to seep away and distribute and the influence of different soil quality is reduced. 

If the water has completely penetrated the different layers of soil after a few minutes, the soil moisture is measured again. On the basis of the moisture actually arrived at the roots, irrigated again if necessary until the desired moisture is reached.

One cause may be that the local weather forecast reported rain promptly. This can be seen in the app.

Likewise, no irrigation is triggered if the outside temperature is below 4 ° C or the sun shines too strong. This prevents a harmful way to break down or burn for the plants. It may also be that the automatic irrigation has been deactivated because the battery has not been sufficiently loaded in the past 14 days. Also ensure that you have not incorrectly selected "Worning" in the irrigation settings per area or that an incorrect lowering of the moisture is set.

After the first successful installation, the automatic irrigation is deactivated for safety reasons until the battery of the valve has been loaded for 60 minutes. During this time, however, you can start the irrigation manually by "watering now".

Right, Miyo is more than a common irrigation computer. Nevertheless, it is necessary to define periods where it can generally be irrigated, even if MIYO then decides individually about irrigation within the defined periods.

So you also define when it should not be irrigated. A frequently used scenario is, for example, to only allow grass irrigation in the morning, since you are often in the garden in the afternoon and of course don't want to get wet. You can program individually every weekday.

In the app you will find the function for every irrigation area statistics. Feuability development, temperature, brightness and irrigation can be seen as a chart there.

When placing the sensor, it is very important that the earth lies on the measuring surface and no air is enclosed. If your sensor displays 0% for a long time, or never rise above 30%, please check whether the earth has been well pressed onto the measuring surface. If necessary, replace the sensor.

Since both plastic and the batteries of the devices can be damaged by frost, the devices should be transferred to winter mode at the latest at outside temperatures below 4 ° C.

This puts the devices into an energy saving mode in which the batteries survive for several months without new charging. This presupposes that the devices are fully loaded into winter mode. If in doubt, it is possible at any time and also sensible to load the devices in the sun as long as the temperature remains above 4 ° C. It makes no difference for the load whether the devices are in active mode or in winter mode.

Deactivation before winter:

Treat your sensors and valves a lot of sun in advance so that the battery comes into winter mode. Alternatively, it is possible to load the devices in winter mode in the sun at any time.

1. Turn off the water supply for the garden, empty and make it winter -proof. 

2. Disassemble the valve. 

3. Activate winter mode in the app for every irrigation area. ! This opens the valve. ! 

4. Pull the sensor out of the ground. 

5. Valve and sensor dry and store at 0 ° C to 50 ° C. The valve and sensor then only send a message to the Cube every 4 hours and are therefore only available at these intervals. 

6. Cube possibly separate from power supply - all settings remain locally saved even without a power supply.

Activation in spring

1. Connect Cube again (see installation). Place devices to the sun to store.

2. End winter mode in the app. 

3. End winter mode of the valve and sensor. A maximum of 4 hours after the winter mode is deactivated in the app, the devices should run again in active mode. In order to shorten this duration, the magnet can be kept right to the upper edge of the solar cell of the sensor or valve for 1 second. 

4. Assemble the devices again, turn on the water supply for the garden. 

We also wrote a blog post.

By default, sensors can be reached at 30s intervals, valves in intervals of 20s. As long as it also takes a maximum of instructions such as irrigation starts or LED blinkers. Longer intervals can also be used to save energy. This can be seen in the app.

The technical data of all devices can be found in the technical informationDownloads.

The app is available for both iOS and Android in German, English, French, Spanish, Italian, Arabic, Danish, Turkish, Dutch, Czech and Hungarian. The language of the app depends on the system setting of the smartphone.

When creating a garden in the app, you will be asked about the location of the garden. This location is used for the weather forecast.

In order to fully charge the battery from a low level of charge, you need about 40 hours of sunlight. On average, approximately an hour of direct sunlight a day is sufficient to obtain the loading of the charged batteries.

Sensors measure the illuminance, which essentially also determines the yield of the solar panel of sensors and valves. The sign of the SI unit of the illuminance (Lux) is LX. The illuminance is graphically prepared in the statistics in the app.

Plants need values ​​of at least 500 to 10,000 LX for their growth. 

The beams indicate the radio strength of a sensor/valve to the Cube. The further the distance, the less bars are displayed. There is no display of the battery charging status.

Since the connections on the valve are made of plastic, we also recommend using plastic fittings. Features made of brass basically work, but it is important to ensure that the valve is set straight during assembly, otherwise the plastic thread can be damaged by the metal thread. You can find suitable fittings in ourWeb shop.

We have all information underservicecompiled for you.

This can have several reasons:

The battery of the device is empty.

In this case, you must have already received warnings and error messages (alarms). Put the device in the sun for at least 4 hours to charge the battery. Charging does not work through a window pane.

A missing radio connection.

Make sure that the cube is not shielded by objects. Should the connection stop more often, turn sensor/valve in a first step by 90 ° to the left or right.

If that doesn't work either, reduce the distance between the devices by placing the cube in another place in the house. When choosing the place, make sure that the cube in the air line towards the garden has to overcome as few walls and other obstacles as possible.

Please see also the FAQ "Where do I install the Cube most sensibly?"

Miyo continues to work completely self -sufficient and provides your garden.

You just can't access the app.

Unfortunately, Miyo cannot work without electricity. As soon as the power supply is ensured, Miyo starts fully automatically. With a power bank you can bridge a system failure for some time.

If the cube is no longer accessible for the valves, irrigation is automatically stopped.

Your irrigation settings are retained because they are stored locally.

Make sure in the Miyo app that the cloud connection for the Cube is activated.

Check whether the LAN cable is firmly connected to the Cube and the router. The 2 LEDs on the LAN socket of the cube must shine or flash.

Check whether your router has an internet connection.

The cube communicates with the Miyo Cloud via the ports 3810 and 3811. Check whether the ports are released on the router and in the firewall.

The LED on the left shines when the Cube is supplied with electricity. If this LED does not light up, make sure that the charging cable is correctly infected.

The middle LED stands for the radio connection of the cub. If this does not light up, the devices do not communicate with each other and your Miyo system no longer works. In this case, restart the cube by pressing the white button on the back of the cub for 5 seconds.

The right LED with the cloud symbol stands for the internet connection. If this does not light up, you have no connection to your app, unless you are in the same network with your cell phone. No weather forecasts are also accessed. To fix this problem, make sure that the cloud connection in the app is activated that your router has an internet connection and that the network cable is correctly connected. Check whether the LEDs shine or flash on the network socket of the cub. The Cube communicates with the Miyo Cloud via the ports 3810 and 3811. These must not be closed to the router and the firewall. 

If the irrigation does not start, your devices may be updating or that the minimum number of 2 hours has not yet been loaded.

You can track the status of your devices in the app in the respective area. The number of hours invited can be found in the settings to sensors and valves and then with the respective info symbol of the devices.

When the Cube is connected to the Internet and the cloud is activated, it continuously checks whether there is an update for the devices and starts the download automatically. The new firmware for valves or sensors is then installed via radio on the devices as soon as the solar voltage on the respective device is above 3.9V.

The Cube firmware is checked once a day, about midnight and, if necessary, updated. A functioning internet connection and an activated cloud connection is again a prerequisite.

The Cube and the Miyo Cloud only store functionally necessary data. This includes the location, device reliefs and irrigation parameters and activities. An account is usually necessary for the company, for which the name and email address must be specified. You can find detailed information on this in the Data protection declarationthat is stored in the app stores and here on the website.

All data required for irrigation are stored at the Cube. At the same time, the Miyo Cloud is available to enable the Cubes, cell phone apps and other systems to exchange data. The productive servers run at Microsoft Azure and are protected from outside according to the highest security standards. This data is not passed on to third parties in any form and only used internally for support and further development. For us, the ananonymous system data provide valuable input for product development.

If you don't feel like a cloud service that stores your data, you can only limit Miyo to your home WLAN. The Cube then receives weather data and updates from the cloud, but no personal data from the Cube is added to the cloud.

You can activate the cloud in the Miyo app at any time so that you can also use the Miyo app and online services such as IFTTT outside of your home wlan.

Since each device has a clear serial number, we can understand where the stolen device is installed and act accordingly. So please report any theft immediately.

You will also receive a warning in the app as soon as the Cube no longer reaches the sensors or valves.

Yes, the tap on which the valve is mounted must be constantly open. The regulation via opening and closing takes over a tested solenoid valve. Appropriate collateral is stored in the logic of the cube and the valve to prevent water damage. Disruptions and problems are reported directly to you via the app.

In order to prevent leak, we only recommend using the fittings supplied.

Websocket Request

Port: 3810

Format: JSON

ws://*IP*:3810

Note large and small writing

Notifications

The Cube sends notifications via the website. A notification includes the ID -1 and the “Notification” value with information about the changes made.

Example:

{
  "id": -1,
  "notification": "Device.stateChanged",
  "params": {
    "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
    "type": "rssi",
    "value": -41
  }
}

Delivers a new apikey if access to the cube is allowed. Pressing the button on the Cube or the API methodSystem.allowlinkAllows one -time access for 15 minutes.

INQUIRY

Example:

{
  "id": 1,
  "method": "Link.all"
}

Parameter:

ANSWER

{
"apiKey": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
"id": 1,
"status": "success"
}

Plant the next update, does not start immediately.

INQUIRY

Example:

{
  "id": 1,
  "method": "System.update"
}

Parameter:

ANSWER

{
"id": 1,
"status": "success"
}

Provides information about all devices.

INQUIRY

Example:

{
  "id": 1,
  "apiKey": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
  "method": "Device.all",
  "params": {
    "typeIds": [
      "valve"
    ]
  }
}

Parameter:

ANSWER

{
  "id": 1,
  "params": {
    "{abcd1234-ab12-ab12-ab12-abcdef123456};1": {
      "channel": 1,
      "deviceTypeId": "moistureOutdoor",
      "firmware": "1.34.0",
      "id": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
      "ipv6": "fe80::211:7d00:30:abcd%zmd0",
      "lastUpdate": 0,
      "stateTypes": {
        "0": {
          "type": "moisture",
          "value": 0
        },
        "1": {
          "type": "brightness",
          "value": 0
        },
        "2": {
          "type": "temperature",
          "value": 0
        },
        "3": {
          "type": "frequency",
          "value": 0
        },
        "4": {
          "type": "irrigationNecessary",
          "value": false
        },
        "5": {
          "type": "irrigationPossible",
          "value": false
        },
        "6": {
          "type": "temperatureOffset",
          "value": 0
        },
        "7": {
          "type": "rssi",
          "value": -200
        },
        "8": {
          "type": "reachable",
          "value": false
        },
        "9": {
          "type": "solarVoltage",
          "value": 0
        },
        "10": {
          "type": "sunWithinWeek",
          "value": true
        },
        "11": {
          "type": "lowPower",
          "value": false
        },
        "12": {
          "type": "otauPossible",
          "value": false
        },
        "13": {
          "type": "otauProgress",
          "value": 0
        },
        "14": {
          "type": "otauStatus",
          "value": ""
        },
        "15": {
          "type": "winterMode",
          "value": false
        },
        "16": {
          "type": "chargingDurationDay",
          "value": 0
        },
        "17": {
          "type": "charging",
          "value": false
        },
        "18": {
          "type": "chargingLess",
          "value": false
        },
        "19": {
          "type": "lastResetTime",
          "value": 0
        },
        "20": {
          "type": "lastResetType",
          "value": -1
        }
      }
    },
    "{abcd1234-ab12-ab12-ab12-abcdef123456};1": {
      "channel": 1,
      "deviceTypeId": "moistureOutdoor",
      "firmware": "1.34.0",
      "id": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
      "ipv6": "fe80::211:7d00:30:abcd%zmd0",
      "lastUpdate": 0,
      "stateTypes": {
        "0": {
          "type": "moisture",
          "value": 0
        },
        "1": {
          "type": "brightness",
          "value": 0
        },
        "2": {
          "type": "temperature",
          "value": 0
        },
        "3": {
          "type": "frequency",
          "value": 0
        },
        "4": {
          "type": "irrigationNecessary",
          "value": false
        },
        "5": {
          "type": "irrigationPossible",
          "value": false
        },
        "6": {
          "type": "temperatureOffset",
          "value": 0
        },
        "7": {
          "type": "rssi",
          "value": -200
        },
        "8": {
          "type": "reachable",
          "value": false
        },
        "9": {
          "type": "solarVoltage",
          "value": 0
        },
        "10": {
          "type": "sunWithinWeek",
          "value": true
        },
        "11": {
          "type": "lowPower",
          "value": false
        },
        "12": {
          "type": "otauPossible",
          "value": false
        },
        "13": {
          "type": "otauProgress",
          "value": 0
        },
        "14": {
          "type": "otauStatus",
          "value": ""
        },
        "15": {
          "type": "winterMode",
          "value": false
        },
        "16": {
          "type": "chargingDurationDay",
          "value": 0
        },
        "17": {
          "type": "charging",
          "value": false
        },
        "18": {
          "type": "chargingLess",
          "value": false
        },
        "19": {
          "type": "lastResetTime",
          "value": 0
        },
        "20": {
          "type": "lastResetType",
          "value": -1
        }
      }
    },
    "{abcd1234-ab12-ab12-ab12-abcdef123456};1": {
      "channel": 1,
      "deviceTypeId": "moistureOutdoor",
      "firmware": "1.34.0",
      "id": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
      "ipv6": "fe80::211:7d00:30:abcd%zmd0",
      "lastUpdate": 0,
      "stateTypes": {
        "0": {
          "type": "moisture",
          "value": 0
        },
        "1": {
          "type": "brightness",
          "value": 0
        },
        "2": {
          "type": "temperature",
          "value": 0
        },
        "3": {
          "type": "frequency",
          "value": 0
        },
        "4": {
          "type": "irrigationNecessary",
          "value": false
        },
        "5": {
          "type": "irrigationPossible",
          "value": false
        },
        "6": {
          "type": "temperatureOffset",
          "value": 0
        },
        "7": {
          "type": "rssi",
          "value": -200
        },
        "8": {
          "type": "reachable",
          "value": false
        },
        "9": {
          "type": "solarVoltage",
          "value": 0
        },
        "10": {
          "type": "sunWithinWeek",
          "value": true
        },
        "11": {
          "type": "lowPower",
          "value": false
        },
        "12": {
          "type": "otauPossible",
          "value": false
        },
        "13": {
          "type": "otauProgress",
          "value": 0
        },
        "14": {
          "type": "otauStatus",
          "value": ""
        },
        "15": {
          "type": "winterMode",
          "value": false
        },
        "16": {
          "type": "chargingDurationDay",
          "value": 0
        },
        "17": {
          "type": "charging",
          "value": false
        },
        "18": {
          "type": "chargingLess",
          "value": false
        },
        "19": {
          "type": "lastResetTime",
          "value": 0
        },
        "20": {
          "type": "lastResetType",
          "value": -1
        }
      }
    }
  },
  "status": "success"
}

Provides information about a device.

INQUIRY

Example:

{
  "id": 1,
  "apiKey": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
  "method": "Device.status",
  "params": {
    "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}"
  }
}

Parameter:

ANSWER

{
  "id": 1,
  "params": {
    "device": {
      "channel": 1,
      "deviceTypeId": "moistureOutdoor",
      "firmware": "1.34.0",
      "id": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
      "ipv6": "fe80::211:7d00:30:abcd%zmd0",
      "lastUpdate": 0,
      "stateTypes": {
        "0": {
          "type": "moisture",
          "value": 0
        },
        "1": {
          "type": "brightness",
          "value": 0
        },
        "2": {
          "type": "temperature",
          "value": 0
        },
        "3": {
          "type": "frequency",
          "value": 0
        },
        "4": {
          "type": "irrigationNecessary",
          "value": false
        },
        "5": {
          "type": "irrigationPossible",
          "value": false
        },
        "6": {
          "type": "temperatureOffset",
          "value": 0
        },
        "7": {
          "type": "rssi",
          "value": -200
        },
        "8": {
          "type": "reachable",
          "value": false
        },
        "9": {
          "type": "solarVoltage",
          "value": 0
        },
        "10": {
          "type": "sunWithinWeek",
          "value": true
        },
        "11": {
          "type": "lowPower",
          "value": false
        },
        "12": {
          "type": "otauPossible",
          "value": false
        },
        "13": {
          "type": "otauProgress",
          "value": 0
        },
        "14": {
          "type": "otauStatus",
          "value": ""
        },
        "15": {
          "type": "winterMode",
          "value": false
        },
        "16": {
          "type": "chargingDurationDay",
          "value": 0
        },
        "17": {
          "type": "charging",
          "value": false
        },
        "18": {
          "type": "chargingLess",
          "value": false
        },
        "19": {
          "type": "lastResetTime",
          "value": 0
        },
        "20": {
          "type": "lastResetType",
          "value": -1
        }
      }
    },
  "status": "success"
}

Delivers all devices that are not assigned to any area.

INQUIRY

Example:

{
  "id": 1,
  "apiKey": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
  "method": "Device.free",
  "params": {
    "typeIds": [
      "valve"
    ]
  }
}

Parameter:

ANSWER

{
  "id": 1,
  "params": {
    "{abcd1234-ab12-ab12-ab12-abcdef123456};1": {
      "channel": 1,
      "deviceTypeId": "moistureOutdoor",
      "firmware": "1.34.0",
      "id": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
      "ipv6": "fe80::211:7d00:30:abcd%zmd0",
      "lastUpdate": 0,
      "stateTypes": {
        "0": {
          "type": "moisture",
          "value": 0
        },
        "1": {
          "type": "brightness",
          "value": 0
        },
        "2": {
          "type": "temperature",
          "value": 0
        },
        "3": {
          "type": "frequency",
          "value": 0
        },
        "4": {
          "type": "irrigationNecessary",
          "value": false
        },
        "5": {
          "type": "irrigationPossible",
          "value": false
        },
        "6": {
          "type": "temperatureOffset",
          "value": 0
        },
        "7": {
          "type": "rssi",
          "value": -200
        },
        "8": {
          "type": "reachable",
          "value": false
        },
        "9": {
          "type": "solarVoltage",
          "value": 0
        },
        "10": {
          "type": "sunWithinWeek",
          "value": true
        },
        "11": {
          "type": "lowPower",
          "value": false
        },
        "12": {
          "type": "otauPossible",
          "value": false
        },
        "13": {
          "type": "otauProgress",
          "value": 0
        },
        "14": {
          "type": "otauStatus",
          "value": ""
        },
        "15": {
          "type": "winterMode",
          "value": false
        },
        "16": {
          "type": "chargingDurationDay",
          "value": 0
        },
        "17": {
          "type": "charging",
          "value": false
        },
        "18": {
          "type": "chargingLess",
          "value": false
        },
        "19": {
          "type": "lastResetTime",
          "value": 0
        },
        "20": {
          "type": "lastResetType",
          "value": -1
        }
      }
    },
    "{abcd1234-ab12-ab12-ab12-abcdef123456};1": {
      "channel": 1,
      "deviceTypeId": "moistureOutdoor",
      "firmware": "1.34.0",
      "id": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
      "ipv6": "fe80::211:7d00:30:abcd%zmd0",
      "lastUpdate": 0,
      "stateTypes": {
        "0": {
          "type": "moisture",
          "value": 0
        },
        "1": {
          "type": "brightness",
          "value": 0
        },
        "2": {
          "type": "temperature",
          "value": 0
        },
        "3": {
          "type": "frequency",
          "value": 0
        },
        "4": {
          "type": "irrigationNecessary",
          "value": false
        },
        "5": {
          "type": "irrigationPossible",
          "value": false
        },
        "6": {
          "type": "temperatureOffset",
          "value": 0
        },
        "7": {
          "type": "rssi",
          "value": -200
        },
        "8": {
          "type": "reachable",
          "value": false
        },
        "9": {
          "type": "solarVoltage",
          "value": 0
        },
        "10": {
          "type": "sunWithinWeek",
          "value": true
        },
        "11": {
          "type": "lowPower",
          "value": false
        },
        "12": {
          "type": "otauPossible",
          "value": false
        },
        "13": {
          "type": "otauProgress",
          "value": 0
        },
        "14": {
          "type": "otauStatus",
          "value": ""
        },
        "15": {
          "type": "winterMode",
          "value": false
        },
        "16": {
          "type": "chargingDurationDay",
          "value": 0
        },
        "17": {
          "type": "charging",
          "value": false
        },
        "18": {
          "type": "chargingLess",
          "value": false
        },
        "19": {
          "type": "lastResetTime",
          "value": 0
        },
        "20": {
          "type": "lastResetType",
          "value": -1
        }
      }
    },
    "{abcd1234-ab12-ab12-ab12-abcdef123456};1": {
      "channel": 1,
      "deviceTypeId": "moistureOutdoor",
      "firmware": "1.34.0",
      "id": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
      "ipv6": "fe80::211:7d00:30:abcd%zmd0",
      "lastUpdate": 0,
      "stateTypes": {
        "0": {
          "type": "moisture",
          "value": 0
        },
        "1": {
          "type": "brightness",
          "value": 0
        },
        "2": {
          "type": "temperature",
          "value": 0
        },
        "3": {
          "type": "frequency",
          "value": 0
        },
        "4": {
          "type": "irrigationNecessary",
          "value": false
        },
        "5": {
          "type": "irrigationPossible",
          "value": false
        },
        "6": {
          "type": "temperatureOffset",
          "value": 0
        },
        "7": {
          "type": "rssi",
          "value": -200
        },
        "8": {
          "type": "reachable",
          "value": false
        },
        "9": {
          "type": "solarVoltage",
          "value": 0
        },
        "10": {
          "type": "sunWithinWeek",
          "value": true
        },
        "11": {
          "type": "lowPower",
          "value": false
        },
        "12": {
          "type": "otauPossible",
          "value": false
        },
        "13": {
          "type": "otauProgress",
          "value": 0
        },
        "14": {
          "type": "otauStatus",
          "value": ""
        },
        "15": {
          "type": "winterMode",
          "value": false
        },
        "16": {
          "type": "chargingDurationDay",
          "value": 0
        },
        "17": {
          "type": "charging",
          "value": false
        },
        "18": {
          "type": "chargingLess",
          "value": false
        },
        "19": {
          "type": "lastResetTime",
          "value": 0
        },
        "20": {
          "type": "lastResetType",
          "value": -1
        }
      }
    }
  },
  "status": "success"
}

Deletes a device from the cube.

INQUIRY

Example:

{
  "id": 1,
  "apiKey": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
  "method": "Device.remove",
  "params": {
    "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}"
  }
}

Parameter:

ANSWER

{
  "id": 1,
  "status": "success"
}

Connects the cube to a device that was activated with the magnet.

INQUIRY

Example:

{
  "id": 1,
  "apiKey": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
  "method": "Device.teachin"
}

Parameter:

ANSWER

{
  "id": 1,
  "status": "success"
}

Activates the LED on the selected device.

INQUIRY

Example:

{
  "id": 1,
  "apiKey": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
  "method": "Device.highlight",
  "params": {
    "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}"
  }
}

Parameter:

ANSWER

{
  "id": 1,
  "status": "success"
}

Provides information about all areas.

INQUIRY

Example:

{
  "id": 1,
  "apiKey": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
  "method": "Circuit.all"
}

Parameter:

ANSWER

{
    "id": 1,
    "params": {
        "circuits": {
            "{abcd1234-ab12-ab12-ab12-abcdef123456}": {
                "id": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "name": "garden",
                "params": {
                    "automaticMode": false,
                    "borderBottom": "40",
                    "borderTop": "60",
                    "considerMower": false,
                    "day0": "10:50-10:59;23:50-23:59",
                    "day1": "",
                    "day2": "",
                    "day3": "16:50-20:50",
                    "day4": "",
                    "day5": "",
                    "day6": "",
                    "irrigationDelayForecast": true,
                    "irrigationType": 0,
                    "locationType": 0,
                    "plantType": 1,
                    "soilType": 0,
                    "temperatureOffset": 0,
                    "valveStaggering": true
                },
                "sensor": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "sensorData": {
                    "channel": 100,
                    "deviceTypeId": "moistureOutdoor",
                    "firmware": "",
                    "id": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                    "ipv6": "fe80::211:7d00:30:abcd%zmd0",
                    "lastUpdate": 1563290254,
                    "stateTypes": {
                        "0": {
                            "type": "moisture",
                            "value": 100
                        },
                        "1": {
                            "type": "brightness",
                            "value": 0
                        },
                        "2": {
                            "type": "temperature",
                            "value": 0
                        },
                        "3": {
                            "type": "frequency",
                            "value": 0
                        },
                        "4": {
                            "type": "irrigationNecessary",
                            "value": false
                        },
                        "5": {
                            "type": "irrigationPossible",
                            "value": false
                        },
                        "6": {
                            "type": "temperatureOffset",
                            "value": 0
                        },
                        "7": {
                            "type": "rssi",
                            "value": -200
                        },
                        "8": {
                            "type": "reachable",
                            "value": false
                        },
                        "9": {
                            "type": "solarVoltage",
                            "value": 0
                        },
                        "10": {
                            "type": "sunWithinWeek",
                            "value": true
                        },
                        "11": {
                            "type": "lowPower",
                            "value": false
                        },
                        "12": {
                            "type": "otauPossible",
                            "value": false
                        },
                        "13": {
                            "type": "otauProgress",
                            "value": 0
                        },
                        "14": {
                            "type": "otauStatus",
                            "value": ""
                        },
                        "15": {
                            "type": "winterMode",
                            "value": false
                        },
                        "16": {
                            "type": "chargingDurationDay",
                            "value": 0
                        },
                        "17": {
                            "type": "charging",
                            "value": false
                        },
                        "18": {
                            "type": "chargingLess",
                            "value": false
                        },
                        "19": {
                            "type": "lastResetTime",
                            "value": 0
                        },
                        "20": {
                            "type": "lastResetType",
                            "value": -1
                        }
                    }
                },
                "stateTypes": {
                    "0": {
                        "type": "irrigation",
                        "value": false
                    },
                    "1": {
                        "type": "automaticMode",
                        "value": false
                    },
                    "2": {
                        "type": "externBlock",
                        "value": false
                    },
                    "3": {
                        "type": "winterMode",
                        "value": false
                    },
                    "4": {
                        "type": "irrigationNextStart",
                        "value": 1563461400
                    },
                    "5": {
                        "type": "irrigationNextEnd",
                        "value": 1563475800
                    },
                    "6": {
                        "type": "valveStaggeringIndex",
                        "value": 0
                    }
                },
                "valves": {}
            },
            "{abcd1234-ab12-ab12-ab12-abcdef123456}": {
                "id": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "name": "Flowers",
                "params": {
                    "automaticMode": false,
                    "borderBottom": "40",
                    "borderTop": "60",
                    "considerMower": false,
                    "day0": "",
                    "day1": "09:35-11:32",
                    "day2": "",
                    "day3": "",
                    "day4": "",
                    "day5": "",
                    "day6": "",
                    "irrigationDelayForecast": false,
                    "irrigationType": 0,
                    "locationType": 2,
                    "plantType": 0,
                    "soilType": 1,
                    "temperatureOffset": 0,
                    "valveStaggering": true
                },
                "sensor": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "sensorData": {
                    "channel": 100,
                    "deviceTypeId": "moistureOutdoor",
                    "firmware": "",
                    "id": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                    "ipv6": "fe80::211:7d00:30:abcd%zmd0",
                    "lastUpdate": 1563290254,
                    "stateTypes": {
                        "0": {
                            "type": "moisture",
                            "value": 100
                        },
                        "1": {
                            "type": "brightness",
                            "value": 0
                        },
                        "2": {
                            "type": "temperature",
                            "value": 0
                        },
                        "3": {
                            "type": "frequency",
                            "value": 0
                        },
                        "4": {
                            "type": "irrigationNecessary",
                            "value": false
                        },
                        "5": {
                            "type": "irrigationPossible",
                            "value": false
                        },
                        "6": {
                            "type": "temperatureOffset",
                            "value": 0
                        },
                        "7": {
                            "type": "rssi",
                            "value": -200
                        },
                        "8": {
                            "type": "reachable",
                            "value": false
                        },
                        "9": {
                            "type": "solarVoltage",
                            "value": 0
                        },
                        "10": {
                            "type": "sunWithinWeek",
                            "value": true
                        },
                        "11": {
                            "type": "lowPower",
                            "value": false
                        },
                        "12": {
                            "type": "otauPossible",
                            "value": false
                        },
                        "13": {
                            "type": "otauProgress",
                            "value": 0
                        },
                        "14": {
                            "type": "otauStatus",
                            "value": ""
                        },
                        "15": {
                            "type": "winterMode",
                            "value": false
                        },
                        "16": {
                            "type": "chargingDurationDay",
                            "value": 0
                        },
                        "17": {
                            "type": "charging",
                            "value": false
                        },
                        "18": {
                            "type": "chargingLess",
                            "value": false
                        },
                        "19": {
                            "type": "lastResetTime",
                            "value": 0
                        },
                        "20": {
                            "type": "lastResetType",
                            "value": -1
                        }
                    }
                },
                "sensorValve": {
                    "channel": 1,
                    "valve": "{abcd1234-ab12-ab12-ab12-abcdef123456}"
                },
                "stateTypes": {
                    "0": {
                        "type": "irrigation",
                        "value": false
                    },
                    "1": {
                        "type": "automaticMode",
                        "value": false
                    },
                    "2": {
                        "type": "externBlock",
                        "value": false
                    },
                    "3": {
                        "type": "winterMode",
                        "value": false
                    },
                    "4": {
                        "type": "irrigationNextStart",
                        "value": 1563867300
                    },
                    "5": {
                        "type": "irrigationNextEnd",
                        "value": 1563874320
                    },
                    "6": {
                        "type": "valveStaggeringIndex",
                        "value": 0
                    }
                },
                "valves": {
                    "0": {
                        "channel": 1,
                        "valve": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                        "valveData": {
                            "channel": 100,
                            "deviceTypeId": "valve",
                            "firmware": "1.51.0",
                            "id": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                            "ipv6": "fe80::211:7d00:30:abcd%zmd0",
                            "lastUpdate": 1563352577,
                            "stateTypes": {
                                "0": {
                                    "type": "valveInitialClose",
                                    "value": false
                                },
                                "1": {
                                    "type": "valveStatus",
                                    "value": false
                                },
                                "2": {
                                    "type": "openValve",
                                    "value": false
                                },
                                "3": {
                                    "type": "lastIrrigationStart",
                                    "value": 0
                                },
                                "4": {
                                    "type": "lastIrrigationEnd",
                                    "value": 1563290494
                                },
                                "5": {
                                    "type": "lastIrrigationDuration",
                                    "value": 1563290494
                                },
                                "6": {
                                    "type": "rssi",
                                    "value": -35
                                },
                                "7": {
                                    "type": "reachable",
                                    "value": true
                                },
                                "8": {
                                    "type": "solarVoltage",
                                    "value": "0.84"
                                },
                                "9": {
                                    "type": "sunWithinWeek",
                                    "value": true
                                },
                                "10": {
                                    "type": "lowPower",
                                    "value": false
                                },
                                "11": {
                                    "type": "otauPossible",
                                    "value": false
                                },
                                "12": {
                                    "type": "otauProgress",
                                    "value": 0
                                },
                                "13": {
                                    "type": "otauStatus",
                                    "value": ""
                                },
                                "14": {
                                    "type": "winterMode",
                                    "value": false
                                },
                                "15": {
                                    "type": "chargingDurationDay",
                                    "value": 0
                                },
                                "16": {
                                    "type": "charging",
                                    "value": false
                                },
                                "17": {
                                    "type": "chargingLess",
                                    "value": false
                                },
                                "18": {
                                    "type": "lastResetTime",
                                    "value": 0
                                },
                                "19": {
                                    "type": "lastResetType",
                                    "value": -1
                                }
                            }
                        }
                    }
                }
            }
        }
    },
    "status": "success"
}

Provides information about an area, analogous to/all.

INQUIRY

Example:

{
  "id": 1,
  "apiKey": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
  "method": "Circuit.status",
  "params": {
    "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}"
  }
}

Parameter:

ANSWER

{
    "id": 1,
    "params": {
        "circuit": {
            "id": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
            "name": "Flowers",
            "params": {
                "automaticMode": false,
                "borderBottom": "40",
                "borderTop": "60",
                "considerMower": false,
                "day0": "",
                "day1": "09:35-11:32",
                "day2": "",
                "day3": "",
                "day4": "",
                "day5": "",
                "day6": "",
                "irrigationDelayForecast": false,
                "irrigationType": 0,
                "locationType": 2,
                "plantType": 0,
                "soilType": 1,
                "temperatureOffset": 0,
                "valveStaggering": true
            },
            "sensor": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
            "sensorData": {
                "channel": 100,
                "deviceTypeId": "moistureOutdoor",
                "firmware": "",
                "id": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "ipv6": "fe80::211:7d00:30:abcd%zmd0",
                "lastUpdate": 1563290254,
                "stateTypes": {
                    "0": {
                        "type": "moisture",
                        "value": 100
                    },
                    "1": {
                        "type": "brightness",
                        "value": 0
                    },
                    "2": {
                        "type": "temperature",
                        "value": 0
                    },
                    "3": {
                        "type": "frequency",
                        "value": 0
                    },
                    "4": {
                        "type": "irrigationNecessary",
                        "value": false
                    },
                    "5": {
                        "type": "irrigationPossible",
                        "value": false
                    },
                    "6": {
                        "type": "temperatureOffset",
                        "value": 0
                    },
                    "7": {
                        "type": "rssi",
                        "value": -200
                    },
                    "8": {
                        "type": "reachable",
                        "value": false
                    },
                    "9": {
                        "type": "solarVoltage",
                        "value": 0
                    },
                    "10": {
                        "type": "sunWithinWeek",
                        "value": true
                    },
                    "11": {
                        "type": "lowPower",
                        "value": false
                    },
                    "12": {
                        "type": "otauPossible",
                        "value": false
                    },
                    "13": {
                        "type": "otauProgress",
                        "value": 0
                    },
                    "14": {
                        "type": "otauStatus",
                        "value": ""
                    },
                    "15": {
                        "type": "winterMode",
                        "value": false
                    },
                    "16": {
                        "type": "chargingDurationDay",
                        "value": 0
                    },
                    "17": {
                        "type": "charging",
                        "value": false
                    },
                    "18": {
                        "type": "chargingLess",
                        "value": false
                    },
                    "19": {
                        "type": "lastResetTime",
                        "value": 0
                    },
                    "20": {
                        "type": "lastResetType",
                        "value": -1
                    }
                }
            },
            "sensorValve": {
                "channel": 1,
                "valve": "{abcd1234-ab12-ab12-ab12-abcdef123456}"
            },
            "stateTypes": {
                "0": {
                    "type": "irrigation",
                    "value": false
                },
                "1": {
                    "type": "automaticMode",
                    "value": false
                },
                "2": {
                    "type": "externBlock",
                    "value": false
                },
                "3": {
                    "type": "winterMode",
                    "value": false
                },
                "4": {
                    "type": "irrigationNextStart",
                    "value": 1563867300
                },
                "5": {
                    "type": "irrigationNextEnd",
                    "value": 1563874320
                },
                "6": {
                    "type": "valveStaggeringIndex",
                    "value": 0
                }
            },
            "valves": {
                "0": {
                    "channel": 1,
                    "valve": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                    "valveData": {
                        "channel": 100,
                        "deviceTypeId": "valve",
                        "firmware": "1.51.0",
                        "id": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                        "ipv6": "fe80::211:7d00:30:abcd%zmd0",
                        "lastUpdate": 1563352577,
                        "stateTypes": {
                            "0": {
                                "type": "valveInitialClose",
                                "value": false
                            },
                            "1": {
                                "type": "valveStatus",
                                "value": false
                            },
                            "2": {
                                "type": "openValve",
                                "value": false
                            },
                            "3": {
                                "type": "lastIrrigationStart",
                                "value": 0
                            },
                            "4": {
                                "type": "lastIrrigationEnd",
                                "value": 1563290494
                            },
                            "5": {
                                "type": "lastIrrigationDuration",
                                "value": 1563290494
                            },
                            "6": {
                                "type": "rssi",
                                "value": -35
                            },
                            "7": {
                                "type": "reachable",
                                "value": true
                            },
                            "8": {
                                "type": "solarVoltage",
                                "value": "0.84"
                            },
                            "9": {
                                "type": "sunWithinWeek",
                                "value": true
                            },
                            "10": {
                                "type": "lowPower",
                                "value": false
                            },
                            "11": {
                                "type": "otauPossible",
                                "value": false
                            },
                            "12": {
                                "type": "otauProgress",
                                "value": 0
                            },
                            "13": {
                                "type": "otauStatus",
                                "value": ""
                            },
                           "14": {
                                "type": "winterMode",
                                "value": false
                            },
                            "15": {
                                "type": "chargingDurationDay",
                                "value": 0
                            },
                           "16": {
                                "type": "charging",
                                "value": false
                            },
                            "17": {
                                "type": "chargingLess",
                                "value": false
                            },
                            "18": {
                                "type": "lastResetTime",
                                "value": 0
                            },
                            "19": {
                                "type": "lastResetType",
                                "value": -1
                            }
                        }
                    }
                }
            }
        }
    },
    "status": "success"
}

Delivers all sorts of types for soil quality, irrigation devices, plant type and location.

INQUIRY

Example:

{
  "id": 1,
  "apiKey": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
  "method": "Circuit.types"
}

Parameter:

ANSWER

{
    "id": 1,
    "params": {
        "irrigationType": {
            "Drip": 2,
            "Hose": 3,
            "Sprinkler": 1,
            "UpSprinkler": 0
        },
        "locationType": {
            "Covered": 1,
            "Glasshouse": 2,
            "Open": 0
        },
        "plantType": {
            "Gras": 0,
            "Hedge": 1,
            "Individual": 4,
            "Patch": 2,
            "Tree": 3
        },
        "soilType": {
            "Loamy": 0,
            "LoamySandy": 2,
            "Sandy": 1,
            "Unknown": 3
        }
    },
    "status": "success"
}

Delivers the states of all devices within the last week or in the defined periods.

INQUIRY

Example:

{
  "id": 1,
  "apiKey": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
  "method": "Circuit.log",
  "params": {
    "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
    "timeFilters": [
        {"startDate": 1566224417, "endDate": 1566224450},
        {"startDate": 1566204417, "endDate": 1566210000}
    ],
    "deviceIds": [
        "{abcd1234-ab12-ab12-ab12-abcdef123456}",
        "{wxyz9876-yz98-yz98-yz98-uvwxyz987654}"
    ],
    "stateTypeIds": [
        "chargingLess",
        "reachable"
    ],
    "sort": "desc"
  }
}

Parameter:

ANSWER

{
    "id": 1,
    "params": {
        "history": [
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextStart",
                "timestamp": 1562871030000,
                "value": "1563180600"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextEnd",
                "timestamp": 1562871030000,
                "value": "1563181140"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextStart",
                "timestamp": 1563181170000,
                "value": "1563227400"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextEnd",
                "timestamp": 1563181170000,
                "value": "1563227940"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextStart",
                "timestamp": 1563227970000,
                "value": "1563461400"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextEnd",
                "timestamp": 1563227970000,
                "value": "1563475800"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "chargingLess",
                "timestamp": 1563235377000,
                "value": "false"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextStart",
                "timestamp": 1563235410000,
                "value": "1563461400"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextEnd",
                "timestamp": 1563235410000,
                "value": "1563475800"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "reachable",
                "timestamp": 1563237180000,
                "value": "false"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "chargingLess",
                "timestamp": 1563290255000,
                "value": "false"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextStart",
                "timestamp": 1563290262000,
                "value": "1563461400"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextEnd",
                "timestamp": 1563290262000,
                "value": "1563475800"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "reachable",
                "timestamp": 1563292080000,
                "value": "false"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "chargingLess",
                "timestamp": 1563434285000,
                "value": "false"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextStart",
                "timestamp": 1563434292000,
                "value": "1563461400"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextEnd",
                "timestamp": 1563434293000,
                "value": "1563475800"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "reachable",
                "timestamp": 1563436140000,
                "value": "false"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "chargingLess",
                "timestamp": 1563448660000,
                "value": "false"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextStart",
                "timestamp": 1563448675000,
                "value": "1563461400"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextEnd",
                "timestamp": 1563448675000,
                "value": "1563475800"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "chargingLess",
                "timestamp": 1563448684000,
                "value": "false"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "chargingLess",
                "timestamp": 1563448685000,
                "value": "false"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextStart",
                "timestamp": 1563448690000,
                "value": "1563461400"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextEnd",
                "timestamp": 1563448690000,
                "value": "1563475800"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextStart",
                "timestamp": 1563448690000,
                "value": "1563461400"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "irrigationNextEnd",
                "timestamp": 1563448690000,
                "value": "1563475800"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "reachable",
                "timestamp": 1563450540000,
                "value": "false"
            },
            {
                "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "deviceId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
                "source": "LoggingSourceState",
                "stateTypeId": "reachable",
                "timestamp": 1563455520000,
                "value": "false"
            }
        ]
    },
    "status": "success"
}

Adds a new area.

INQUIRY

Example:

{
  "id": 1,
  "apiKey": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
  "method": "Circuit.add",
  "params": {
    "valves": [
        "{abcd1234-ab12-ab12-ab12-abcdef123456}",
        "{wxyz9876-yz98-yz98-yz98-uvwxyz987654}"
    ],
    "sensorId": "0",
    "name": "Flowers",
    "borderTop": 70,
    "borderBottom": 30,
    "automaticMode": true,
    "considerMower": false,
    "irrigationType": "UpSprinkler",
    "plantType": "Gras",
    "soilType": "Loamy",
    "locationType": "Open",
    "valveStaggering": true,
    "day0": "10:50-10:59;23:50-23:55",
    "day3": "12:50-13:00",
    "day4": "08:00-10:00"
  }
}

Parameter:

ANSWER

{
    "id": 1,
    "status": "success"
}

Edits an area.

INQUIRY

Example:

{
  "id": 1,
  "apiKey": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
  "method": "Circuit.edit",
  "params": {
    "circuitId": "{abcd1234-ab12-ab12-ab12-abcdef123456}",
    "valves": [
        "{abcd1234-ab12-ab12-ab12-abcdef123456}",
        "{wxyz9876-yz98-yz98-yz98-uvwxyz987654}"
    ],
    "sensorId": "0",
    "name": "Flowers",
    "borderTop": 70,
    "borderBottom": 30,
    "automaticMode": true,
    "considerMower": false,
    "irrigationType": "UpSprinkler",
    "plantType": "Gras",
    "soilType": "Loamy",
    "locationType": "Open",
    "valveStaggering": true,
    "day0": "10:50-10:59;23:50-23:55",
    "day3": "12:50-13:00",
    "day4": "08:00-10:00"
  }
}

Parameter: