Rehau drip hose 16mm, 50m, including connection set

The REHAU drip hose ensures an even distribution of water to the soil and plants and is suitable for both above and below ground installation. It features built-in, pressure-compensated drippers that combine labyrinth and silicone membrane technology. 

Thanks to the targeted and dropwise release, up to 70% water can be saved when laying underground and around 50% when laying above ground.

Characteristics

• Length: 50m
• The drippers are installed at a distance of 30 cm.
• At a working pressure between 0.8 and 2.5 bar, the water output per dripper is 1.6 liters/hour.
• maximum installation length: 150 m
• easy to shorten or lengthen

Included

• 50 m roll of drip hose
• Outer diameter 16 mm
• 1x tap connection
• 1x T-connector 16 mm
• 1x Endstopfen 16 mm
• 1x hose nozzle 16 mm x 21 mm (1/2″) male thread (for connection to the tap connection).

The Rehau drip hose/pearl hose accessory set with T-pieces, 90° angles, extensions and end pieces is an ideal addition. To prevent the nozzles from becoming clogged, we recommend using a water filter , especially with older pipes or, for example, well systems.

Ideal for use with the smart MIYO irrigation system. With sensor-controlled irrigation, the irrigation limits are usually set narrowly. If no Sensor is used, the water pressure should be set very low and long irrigation times should be used.

Click here for the MIYO starter set .

Manufacturer: Rehau
Manufacturer part number: 12025941